RESIDENTIAL TECHNOLOGY DESIGN + HOME ASSISTANT INTEGRATION

Yours by design

Austin smart homes that beat the heat, ride out the grid, and answer to you.

Texas summers punish a building, and ERCOT makes the grid a question mark. RyzaLab designs Home Assistant systems for Austin: climate automation that stays ahead of the heat, solar and battery that keep the lights on, and local control of the core system. Your configuration export is yours once the project is paid. New builds, older homes and rentals across the metro.

Home Assistant smart home in an Austin, Texas home
Your Home Assistant instance · Your configuration export · Your documentation · No subscription for the core system

WHO WE HELP IN AUSTIN

Built for how Austin actually lives

New-build owners

Just closed on a new build in Mueller, East Austin, or the Leander and Georgetown suburbs, full of builder-grade smart devices that each want their own app and cloud account. We consolidate them into one local Home Assistant dashboard: climate, lighting, locks, cameras, and solar in one place, with no subscription for the core system.

Older-home & bungalow owners

Hyde Park and East Austin bungalows and 1970s and 80s ranch homes with dated wiring and no neutral wires do not have to mean cloud gadgets. We design around what your house actually has, with the right radios (Zigbee, Z-Wave, Thread), so you get modern automation without a gut renovation.

Downtown condos & rental apartments

Living in a downtown high-rise condo or an East Austin or South Congress rental apartment? Smart bulbs, plugs, sensors, and portable hubs require zero drilling or rewiring, respect HOA and lease rules, and move with you when your lease ends.

Lake Austin, solar & battery homes

From Lake Austin and Westlake hillside properties to solar and Powerwall homes across Central Texas, separate apps rarely talk to each other. We integrate solar, battery, HVAC, gates, and load into Home Assistant so your home leans on stored power, pre-cools before the afternoon peak, and rides out an ERCOT conservation event on its own.

Remodel homes

Planning a whole-home renovation, addition, or down-to-the-studs remodel in Central Texas? Designing smart home infrastructure before drywall goes up prevents expensive workarounds later. We design low-voltage pathways, sensor placements, and equipment locations in coordination with your GC and qualified trades.

Photo credits and licenses

These photos were cropped to 16:9, resized to 960 by 540 pixels, re-encoded as JPG and WebP, and stripped of metadata. Each edited image is offered under its linked source license. The photographers do not endorse RyzaLab.

Designed around your day, not around an app.

Morning Routine · Security Check · Movie Night · Goodnight Sequence

WHY RYZALAB

Designed for your space, and documented so it stays understandable.

Every system starts as a design: what to automate, what to buy, what to skip, and why. The decisions are written down, so the system makes sense to you and to anyone who works on it later.

Built for reliability

HOW RYZALAB WORKS

Plan, design, deliver

Design and delivery start only after you approve them in writing.

  1. Start

    Tell us about your space.

  2. Blueprint

    60-minute assessment and written plan.

  3. Scope

    You approve a written scope.

  4. Design

    Designed around your routines.

  5. Install

    Your trades install. We configure.

  6. Test

    Checked against your acceptance criteria.

  7. Handoff

    System map, guide and checklist.

See how each step works

DELIVERABLES

What You Get at Handoff

  • A documented system map (devices, networks, integrations)
  • An Operations Guide for common tasks and recovery
  • Your configuration export, with the decision log and rollback notes
  • A “health score” checklist to keep things stable over time

Your automations.
Your configuration.
Your call.

At handoff you receive an export package with your home's configuration and documentation. Once the project is paid, the files made for your home are yours; our reusable tools, templates and the original repository stay ours. Import the export into your own repository or keep it as an archive. Want your own GitHub repository from the start? Ask, and we will address it in your statement of work.

Ongoing Support is optional.

View the Health Score Checklist

Home technology, planned around you.

Packages in development. Book to discuss fit, scope and pricing.

Each option opens booking to discuss your project.

Standard

Connected Living

Everything in Home Essentials, plus lighting, shades, temperature control, Wi-Fi coverage and music in more rooms.

Explore Connected Living

Premier

Whole Property

Everything in Connected Living, extended to garages, gates, outdoor areas and guesthouses where applicable.

Explore Whole Property

Room Kits

Smart Nursery Kit

Designed for night feeds and everyday routines.

Dimmable lighting, temperature and humidity sensors, and a dedicated baby monitor, with simple controls and guided setup.

Explore the Smart Nursery Kit

Adult Home Support Kit

Everyday support. On your terms.

For older adults and adults with disabilities. Lighting routines and family check-ins, planned around the person at home.

Explore the Adult Home Kit

Packages in development. Each option opens booking to discuss your project.

$75/month

Ongoing Support

Monthly system check-in, firmware updates, new automation requests, and priority response. Optional but popular.

Ask about Ongoing Support

WHO IS BEHIND RYZALAB

About RyzaLab

  • A home's technology should work for the people who live there, and make sense without us.
  • Every system should come with its own manual.
  • Local control should be the default wherever the hardware allows it.
  • You should be able to stop paying us and keep running the core system.

I spent years inside corporate data and risk systems and saw how much of the smart-home market runs on customer data. So I rebuilt our home around local control, documentation and no subscription for the core system.

Our house is the living lab. Nacho the toddler is the stress test. If he can figure it out, it's simple enough for anyone.

Warm, modern living room in soft daylight

FAQ

Common questions

Do you serve all of the Austin area?

Yes. RyzaLab covers Austin and the surrounding metro, including West Lake Hills, Rollingwood, Bee Cave, Lakeway, Sunset Valley, Dripping Springs, Cedar Park, Round Rock, Leander, Pflugerville, Georgetown, Buda and Kyle. Video assessments cover the metro, and remote support via the DIY Partner service works anywhere. Tell us where you are and we will recommend the right approach.

Can a smart home actually help with Texas heat and cooling costs?

Yes, and it is one of the highest-value things we do here. We automate your thermostat and HVAC to pre-cool the house before the afternoon peak, hold setpoints by room and occupancy, and back off when nobody is home. Paired with solar or a battery, the house can shift cooling to cheaper or stored power. It runs locally, so it keeps working even if the internet drops.

Can you integrate my solar panels and Powerwall?

Yes. Solar and battery are common in Austin but usually live in their own apps, disconnected from the rest of the house. We pull solar production, battery state, and home load into Home Assistant so you can shift heavy loads to stored power, prioritize the battery during an ERCOT conservation event, and see everything on one local dashboard.

My house is older with no neutral wires. Can you still automate it?

Yes. Older Austin homes often lack neutral wires at the switch, which breaks many smart switches. We design around what your house actually has, using the right radios (Zigbee, Z-Wave, Thread) and no-neutral-compatible gear so you get real automation without rewiring or a gut renovation.

Why Home Assistant?

It's open source, runs on your own hardware, and supports 2,000+ integrations. The core system carries no monthly fee and keeps working without the internet. Where an integration does need a cloud service, we name it and keep the list short.

Do I need an electrician?

Smart bulbs, plugs, and most sensors are plug-and-play with no electrician needed. For smart switches it depends on your wiring. For any work that crosses that line, we tell you clearly, help you coordinate a licensed Austin electrician, and make sure they have everything they need to do it right.

How does RyzaLab's approach in Austin differ if I am comparing alternative smart home installers or dealer systems?

Austin homeowners comparing dealer platforms like Control4, Crestron, or Savant, or consumer ecosystems like Google Home, Amazon Alexa, and Ring, work with us when they want an open-source Home Assistant system designed for local control and Texas climate and solar workflows. In our approach, the core system runs on hardware in your home without a RyzaLab subscription; Ongoing Support is optional, and third-party devices or services you choose may carry their own fees. At handoff you receive an export package with your home's configuration and documentation, and once the project is paid, the files made for your home are yours.

If I am searching for a local Home Assistant installer or smart home design consultant in Austin, who handles the wiring and setup?

RyzaLab acts as your Austin smart home design consultant and integration lead: we design the system, configure Home Assistant, integrate your devices, and coordinate with qualified trades. When a project requires line-voltage electrical work or low-voltage wiring, qualified trades such as licensed Austin electricians and installers perform the physical installation directly for you, while we supply the specifications and configure everything once the hardware is in place. If you prefer to mount hardware yourself, our DIY Partner service handles the Home Assistant configuration and go-live support.

Can you troubleshoot or upgrade an existing Austin smart home or builder-grade setup?

Yes. Many Austin projects begin with builder-grade thermostats, locks, solar apps, or a half-configured Home Assistant box. We start with an assessment, troubleshooting, and an action plan to bring compatible Zigbee, Z-Wave, Thread, Wi-Fi, and Matter devices into one documented Home Assistant dashboard. Because not every legacy or proprietary component is recoverable or compatible, we verify each device during the Blueprint and only recommend hardware changes where compatibility or reliability requires it.

One app instead of nine. Voice too, if you want it.

WHERE WE WORK

Where we work

Austin, West Lake Hills, Rollingwood, Bee Cave, Lakeway, Sunset Valley, Dripping Springs, Round Rock, Cedar Park, Leander, Georgetown, Pflugerville, Buda, and Kyle across Travis, Williamson, and Hays counties.

Book your consultation

Two ways to get started. Pick what fits.

Start here: Free 15-minute intro call

Not sure what you need? Let's talk. No prep required.

Book a Free Call

Ready to go? Book Your Blueprint

Project Kickoff and Design Package. 60-minute video deep dive. Review your space, map every device, leave with a written plan.

$395

Book Your Blueprint

You will confirm a time on the next screen. Your answers come with you.