I saw this one on Instagram and immediately wanted to make it smarter: ghostly figures drifting across a front window, like the house itself is haunted. The trick is almost embarrassingly simple: a white sheet and a projector.
Here’s how to set it up, plus a few upgrades so it runs itself and you can go back to handing out candy.
What you need
- A projector. Some are sold as Halloween projectors with ghost videos built in, but a regular projector plus a streaming stick or laptop works too.
- A white sheet or shower curtain. Something thin and light-colored that light can shine through.
- A ghost video. Search “Halloween window projection videos.” There are tons of looping ghosts and spooky silhouettes made for exactly this on YouTube.
- Optional smart gear. A smart plug, a motion sensor, and a smart speaker by the window.
The setup
- Hang the sheet inside the window frame, as flat and tight as you can get it.
- Put the projector behind it, inside the room, pointing out at the sheet. Keep the sheet clear of the lens and vents. The image shines through, so from the street it looks like the ghosts (or whatever spooky clip you choose) are floating around inside your house.
- Flip the image horizontally in the projector settings. People are watching from outside, so anything with text or direction will look backward otherwise.
- Kill the lights in that room. The darker it is inside, the better the ghosts look from outside. Keep the porch and steps lit.
That’s the whole trick. Now for the fun part: making it smart.
Make it run itself
- Put it on a schedule. Plug the projector into a smart plug so it turns on at dusk and off at bedtime. Use a plug rated for the projector’s load, and keep cords out of walkways. Follow the projector manual’s shutdown instructions, and don’t cut power at the plug unless the manual permits it.
- Learn from my mistakes: a lot of projectors don’t turn back on when the power does. They just sit there waiting for someone to press the button. Look for a setting like “Auto Power On” before you trust a schedule, and make sure your video starts playing on its own too.
- Add a sound when someone walks up. A motion sensor by the walkway can trigger a creak, a moan or an evil laugh on the speaker by the window. If the sensor sits outside, use an outdoor-rated one. Keep it short and not too loud. You want delighted screams, not crying toddlers or an annoyed neighbor.
- Make a “Haunted Mode” scene. Tie the projector together with purple or green porch lights and a flickering lamp, all in one tap. Tap once when trick-or-treating starts, and again when you’re done.
Pick your scare level
We have a toddler, so in our house this comes in two versions:
- Little kids mode: friendly ghosts, soft colors, gentle sounds. No jump scares.
- Big kids mode: spookier clips, a motion-triggered cackle, and a window light that snaps off right as someone reaches the door (the porch light stays on).
Start gentle, then switch once the little ones have headed home.
Don’t put it all away on Nov. 1
The smart plugs and schedules you just set up will run your holiday lights next month. Swap the ghosts for falling snow, adjust the schedule, and you’re set for the season. Honestly, this is my favorite part of a good smart home setup: you build it once, and it keeps paying off.
Want the rest of the year to run that way? RyzaLab’s Smart Home Blueprint is a 60-minute home assessment by video: we map every device, and you leave with a written plan. Book Your Blueprint.